# Navier-Stokes Equations

In fluid dynamics, the Navier-Stokes equations are equations that describe the three-dimensional motion of viscous fluid substances. In situations where there are no strong temperature gradients in the fluid, these equations provide a very good approximation of reality.

Even though the Navier-Stokes equations have only a limited number of known analytical solutions, they are amenable to fine-gridded computer modeling. The main tool available for their analysis is CFD analysis.

These equations are named after Claude-Louis Navier (1785-1836) and George Gabriel Stokes (1819-1903). The Navier-Stokes equations consist of a time-dependent continuity equation for conservation of mass, three time-dependent conservation of momentum equations, and time-dependent conservation of energy equation. There are four independent variables in the problem, the x, y, and z spatial coordinates of some domain and the time t.

As can be seen, the Navier-Stokes equations are second-order nonlinear partial differential equations. Their solutions have been found to a variety of interesting viscous flow problems. They may be used to model the weather, ocean currents, airflow around an airfoil, and water flow in a pipe or a reactor. The Navier–Stokes equations in their full and simplified forms help with the design of aircraft and cars, blood flow study, nuclear reactors’ design, and many other things.

## Solution of Navier-Stokes Equations

Even though the Navier-Stokes equations have only a limited number of known analytical solutions, they are amenable to fine-gridded computer modeling. The main tool available for their analysis is CFD analysis. CFD is a branch of fluid mechanics that uses numerical analysis and algorithms to solve and analyze problems that involve turbulent fluid flows. It is widely accepted that the Navier–Stokes equations (or simplified Reynolds-averaged Navier–Stokes equations) can exhibit turbulent solutions, and these equations are the basis for essentially all CFD codes. It is possible now to achieve approximate but realistic CFD results for a wide variety of complex two- and three-dimensional viscous flows.

The Navier–Stokes equations are also of great interest in a purely mathematical sense. Unfortunately, the turbulent flow´s highly intermittent and irregular character complicates all analyses. It has not yet been proven that in three dimensions, solutions always exist or that if they do exist, then they are smooth. The general solution of the Navier-Stokes equations with turbulences is often said to be the “last unsolved problem in classical mathematical physics.”

## Characteristics of Turbulent Flow

• Turbulent flow occurs at higher velocitieslow viscosity, and higher characteristic linear dimensions.
• If the Reynolds number is greater than Re > 3500, the flow is turbulent.
• Irregularity: The flow is characterized by the irregular movement of fluid particles, and the movement of fluid particles is chaotic. For this reason, turbulent flow is normally treated statistically rather than deterministically.
• Diffusivity: In turbulent flow, a fairly flat velocity distribution exists across the section of the pipe. The result is that the entire fluid flows at a given single value and drops rapidly, extremely close to the walls. The characteristic responsible for the enhanced mixing and increased rates of mass, momentum, and energy transports in a flow is called “diffusivity”.
• Rotationality: Turbulent flow is characterized by a strong three-dimensional vortex generation mechanism. This mechanism is known as vortex stretching.
• Dissipation: A dissipative process is when the kinetic energy of the turbulent flow is transformed into internal energy by viscous shear stress.

## Kolmogorov Microscales

In the view of Kolmogorov (Andrey Nikolaevich Kolmogorov was a Russian mathematician who made significant contributions to the mathematics of probability theory and turbulence), turbulent motions involve a wide range of scales. From a macroscale at which the energy is supplied to a microscale at which energy is dissipated by viscosity.

For example, consider a cumulus cloud. The macroscale of the cloud can be of the order of kilometers and may grow or persist over long periods. Within the cloud, eddies may occur over scales of the order of millimeters. The microscales may be much smaller for smaller flows, such as pipes. Most of the kinetic energy of the turbulent flow is contained in the macroscale structures. The energy “cascades” from these macroscale structures to microscale structures by an inertial mechanism. This process is known as the turbulent energy cascade.

The smallest scales in turbulent flow are known as the Kolmogorov microscales. These are small enough that molecular diffusion becomes important and viscous dissipation of energy occurs, and the turbulent kinetic energy is dissipated into heat.

The smallest scales in turbulent flow, i.e., the Kolmogorov microscales, are:

where ε is the average rate of the dissipation rate of turbulence kinetic energy per unit mass and has dimensions (m2/s3). ν is the kinematic viscosity of the fluid and has dimensions (m2/s).

The size of the smallest eddy in the flow is determined by viscosity. The Kolmogorov length scale decreases as viscosity decreases. For very high Reynolds number flows, the viscous forces are smaller for inertial forces. Smaller-scale motions are then necessarily generated until the effects of viscosity become important, and energy is dissipated. The ratio of largest to smallest length scales in the turbulent flow is proportional to the Reynolds number (raises with the three-quarters power).

This causes direct numerical simulations of turbulent flow to be practically impossible. For example, consider a flow with a Reynolds number of 106. In this case, the ratio L/l is proportional to 1018/4. Since we have to analyze a three-dimensional problem, we need to compute a grid that consists of at least 1014 grid points. This far exceeds the capacity and possibilities of existing computers.

References:
Reactor Physics and Thermal Hydraulics:
1. J. R. Lamarsh, Introduction to Nuclear Reactor Theory, 2nd ed., Addison-Wesley, Reading, MA (1983).
2. J. R. Lamarsh, A. J. Baratta, Introduction to Nuclear Engineering, 3d ed., Prentice-Hall, 2001, ISBN: 0-201-82498-1.
3. W. M. Stacey, Nuclear Reactor Physics, John Wiley & Sons, 2001, ISBN: 0- 471-39127-1.
4. Glasstone, Sesonske. Nuclear Reactor Engineering: Reactor Systems Engineering, Springer; 4th edition, 1994, ISBN: 978-0412985317
5. Todreas Neil E., Kazimi Mujid S. Nuclear Systems Volume I: Thermal Hydraulic Fundamentals, Second Edition. CRC Press; 2 edition, 2012, ISBN: 978-0415802871
6. Zohuri B., McDaniel P. Thermodynamics in Nuclear Power Plant Systems. Springer; 2015, ISBN: 978-3-319-13419-2
7. Moran Michal J., Shapiro Howard N. Fundamentals of Engineering Thermodynamics, Fifth Edition, John Wiley & Sons, 2006, ISBN: 978-0-470-03037-0
8. Kleinstreuer C. Modern Fluid Dynamics. Springer, 2010, ISBN 978-1-4020-8670-0.
9. U.S. Department of Energy, THERMODYNAMICS, HEAT TRANSFER, AND FLUID FLOW. DOE Fundamentals Handbook, Volume 1, 2 and 3. June 1992.
10. White Frank M., Fluid Mechanics, McGraw-Hill Education, 7th edition, February, 2010, ISBN: 978-0077422417

## See above:

Fluid Dynamics

bk8 casino mu88 bet asia link vào bk8 new88 đăng nhập vn88 pro