Facebook Instagram Youtube Twitter

Radiography Testing

Non-destructive testing, NDT, is a very broad group of structural or material inspections, and as the name implies, these inspections do not destroy the material/structure being examined. NDT plays a critical role in assuring that structural components and systems perform their function in a reliable and cost-effective fashion. Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research. NDT technicians and engineers define and implement tests that locate and characterize material conditions and flaws that might otherwise cause serious accidents, such as planes to crash, reactors failing, trains derailing, pipelines bursting, and a variety of troubling events.

This concept is extended, known as Non-Destructive Evaluation (NDE) when combined with an assessment of the significance of any defects found. However, they are both terms often used interchangeably. Some testing methods must be conducted in a laboratory setting. Others may be adapted for use in the field. Several commonly employed NDT techniques and their characteristics are described below.

Radiography Testing

Radiography testing (RT) involves penetrating gamma or X-radiation to examine parts and products for imperfections. It is one of the conventional NDT methods that has been in use over decades and is still being used by companies worldwide.

  • X-rays, also known as X-radiation, refer to electromagnetic radiation of high energies (no rest mass, no charge). Most X-rays have a wavelength ranging from 0.01 to 10 nanometers (3×1016 Hz to 3×1019 Hz), corresponding to energies from of 100 eV to 100 keV. X-ray wavelengths are shorter than those of UV rays and typically longer than those of gamma rays. The distinction between X-rays and gamma rays is not so simple and has changed in recent decades.  According to the currently valid definition, X-rays are emitted by electrons outside the nucleus, while gamma rays are emitted by the nucleus. X-rays can be generated by an X-ray tube, a vacuum tube that uses a high voltage to accelerate the electrons released by a hot cathode to a high velocity. Upon striking the target, the accelerated electrons are abruptly stopped, and X-rays and heat are generated.
  • Gamma rays, also known as gamma radiation, refer to electromagnetic radiation (no rest mass, no charge) of very high energies. Since the gamma rays are in substance only very high-energy photons, they are very penetrating matter and are thus biologically hazardous. Gamma rays can travel thousands of feet in the air and easily pass through the human body. Gamma rays are emitted by unstable nuclei in their transition from a high-energy state to a lower state, known as gamma decay. In most practical laboratory sources, the excited nuclear states are created in the decay of a parent radionuclide. Therefore, a gamma decay typically accompanies other forms of decay, such as alpha or beta decay.

In general, RT is a method of inspecting materials for hidden subsurface defects by using the ability of X-rays or gamma rays to penetrate various materials of various thicknesses. The intensity of the radiation that penetrates and passes through the material is either captured by:

  • a radiation-sensitive film (Film Radiography)
  • a planer array of radiation-sensitive sensors (Real-time Radiography).

Principle of Operation

bk8vietnamLiên kết đăng nhậpThe radiation source can either be an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases, Cs-137). The choice between X-rays and gamma radiation depends on factors such as thickness, contrast level, etc. For example, X-rays typically work with a lower amount of energy than gamma rays. The thickness is another parameter that influences the results. For example, at thicknesses more than 50 mm, the use of gamma rays increases significantly.

Radiation is directed through a part and onto film or other imaging media, and the resulting radiograph shows the dimensional features of the part. Both in X-rays and gamma radiation, as the radiation passes more through the material, the darker the film becomes on the image produced,. On the contrary, the more the ray is absorbed by the material,, the lighter the image is in those spots. Therefore, possible imperfections are indicated as density changes on the film in the same manner as a medical X-ray shows broken bones.

Radiographic testing is commonly used for weld verification in various industrial applications. In manufacturing, welds are commonly used to join two or more metal parts. The effects of welding on the material surrounding the weld can be detrimental —depending on the materials used and the heat input of the welding process used. The HAZ can be of varying size and strength. For example, the base metal must reach a certain temperature during the welding process, must cool at a specific rate, and must be welded with compatible materials, or the joint may not be strong enough to hold the parts together, or cracks may form in the weld causing it to fail. Defects usually encountered include incomplete penetration, incomplete fusion, undercutting, porosity, and longitudinal cracking. These defects could cause a structure to break or a pipeline to rupture. Welds may be tested using NDT techniques such as industrial radiography or industrial CT scanning using X-rays or gamma rays, ultrasonic testing, liquid penetrant testing, magnetic particle inspection, or via eddy current.

Advantages and Disadvantages


  • It has very few material limitations.
  • Detection of internal defects for thick materials (e.g., pipelines).
  • Minimal or no part preparation is required.
  • One of the major advantages of RT is its documentation capability, and RT provides images of the object under inspection.
  • The probability of misinterpretation of results is minimized since multiple operators can review each image.


  • The impact of radiation on health and the environment can be considered one of the major disadvantages of radiographic testing since a few seconds of being exposed to radiation can result in severe injuries.
  • A high degree of skill and experience is required for exposure and interpretation.
  • The high voltage needed to create X-rays is dangerous for human health also.
  • It is a quite expensive method.
  • Ineffective for planar defects and surface defects.

Materials Science:

  1. U.S. Department of Energy, Material Science. DOE Fundamentals Handbook, Volume 1 and 2. January 1993.
  2. U.S. Department of Energy, Material Science. DOE Fundamentals Handbook, Volume 2 and 2. January 1993.
  3. William D. Callister, David G. Rethwisch. Materials Science and Engineering: An Introduction 9th Edition, Wiley; 9 edition (December 4, 2013), ISBN-13: 978-1118324578.
  4. Eberhart, Mark (2003). Why Things Break: Understanding the World, by the Way, It Comes Apart. Harmony. ISBN 978-1-4000-4760-4.
  5. Gaskell, David R. (1995). Introduction to the Thermodynamics of Materials (4th ed.). Taylor and Francis Publishing. ISBN 978-1-56032-992-3.
  6. González-Viñas, W. & Mancini, H.L. (2004). An Introduction to Materials Science. Princeton University Press. ISBN 978-0-691-07097-1.
  7. Ashby, Michael; Hugh Shercliff; David Cebon (2007). Materials: engineering, science, processing, and design (1st ed.). Butterworth-Heinemann. ISBN 978-0-7506-8391-3.
  8. J. R. Lamarsh, A. J. Baratta, Introduction to Nuclear Engineering, 3d ed., Prentice-Hall, 2001, ISBN: 0-201-82498-1.

See above:

bk8 casino mu88 bet asia link vào bk8 new88 đăng nhập vn88 pro